The gpx tv is a special television brand among the world. It is a must to know the tv remote code for programming instructions. This article will provide you with all the gpx tv remote code and instructions needed to program your gpx universal remote. GPX is a television brand sold in Canada. It is most often found at Sears, Best Buy, and Home Depot stores among others. GPX televisions are top tier televisions.
But their gpx tv remote code can often be hard to program for people not familiar with them. It has an amazing design with a large screen and lots of special functions. Unfortunately, these functions may be unavailable in some areas or settings. If you’re like me, you find it frustrating not to know the correct codes to make the TV behave properly again. Fortunately, there is a youtube video that will give you access to the correct codes.
Universal Remote Codes For GPX TV, One For All
- 000
- 546
- 3980
- 3977
- 13977
- 13980
GPX Remote Control Codes with 5 Digits
- 10360
- 17048
- 12784
- 13196
- 13977
- 13980
- 10179
- 12693
- 13402
GPX Universal Remote Control Codes with 4 Digits
- 0096
- 4701
- 3980
- 3977
- 0944
- 1320
- 4586
- 5040
GPX Remote Control Codes with 3 Digits
- 000
- 179
- 521
- 749
- 722
- 546
- 532
How to access the remote control menu on your TV?
Step 1: Press and hold the remote control’s MUTE and DISPLAY buttons until the remote flashes a message.
Step 2: The first number is the button that you’ll press to access a setting. For example, if the message flashes “003”, you’ll press “3” to access a setting.
Step 3: Press each button once for your desired setting and then press ENTER to save your selection. In this example, after you select “3” from Step 2 above, you’d press 003, 007, 010, 080, and 050 one time each from left to right to get all of them set. When complete, press ENTER again.
Step 4: When you’re finished, press and hold MUTE and DISPLAY until the remote flashes the sequence, “BLINK” then release.
Now you can use the gpx tv remote code to access the television settings menu. GPX TV Universal Remote Codes with Programming Instructions, Authorised Dealer reconditioning service. We offer all types of repairs and TV calibration, repair manual, and remote control programming services for all major brand televisions, including zenith, DirectTV, Sony Bravia, Toshiba tv’s ect. in addition we also carry a large inventory of replacement remote controls and batteries for all major brands at discount pricing.
Steps to Program GPX TV’s Universal Remote Control
Step 1: Enter the code 000 into the remote. Then press POWER and all SELECTOR buttons simultaneously. The remote will flash 003.
Step 2: Press the number you want to change on TV – 03,07,09,11,12 (03,07,09,11 is usually how you pick it up from your TV). The remote will flash the new number.
Step 3: Press each button once for your desired setting. For example, if you want to change the volume level on your TV, and “07” flashed, then press VOL and choose volume from the menu. The remote will flash once for each change you make on the TV.
Step 4: When you’re finished changing settings, press 003 (from Step1) and 050 simultaneously to exit programming mode.
Note: Please note that to use your gpx tv remote code control with a television is each product’s user manual. We recommend that you read the manual before performing any programming. It will show you how to make the necessary adjustments for your specific makes and model.
Unlock the Remote Control Codes for an Old GPX Television
GPX remote controls are universal remotes. They use a lot of the same functions and buttons that are common to many different brands. This makes it easy to use with any brand of TV. The control for an old GPX TV is typically coded by the manufacturer so that only its internal gpx tv remote code is shown. It may be necessary to unlock the codes before you can get them to work with a new TV.
In order to unlock the codes on this television, it must have been made at least five years ago. You will need a universal remote control with programming instructions to help you do this. Instructions are available at radio shack or online through google. However, the TV may be harder to program if you don’t know the manufacturer code for your TV.
